-40%

Viessmann 5224 Control Modules for Light Signals Brand New

$ 27.09

Availability: 60 in stock
  • Brand: Viessmann
  • EAN: 4026602052243
  • MPN: 5224
  • Control System: Digital
  • Type: Function Decoder
  • Condition: New

    Description

    Bauer model building studio
    Shop
    Checkout
    about us
    Blah Blubb
    ---Hummel figurines
    --Fragrance and aroma worlds
    -AWM
    -Albedo
    -Arnold
    -Auhagen
    -Baur
    -Beli-Beco lamps
    -Bemo
    -Brawa
    -Brekina
    -Bush
    -Conrad
    -ESU
    -Electrotren
    -Faller
    -Fleischman H0
    -Fleischmann N
    -Gützold
    -HAG
    -Heki
    -Helian
    -Heris
    -Herpa
    -Hobby train
    -IMU
    -Jouef
    -Kato
    -Kibri
    -Local railroad
    -LGB
    -Lenz
    -Liliput
    -Lima
    -Littfinski
    -Lux
    -Mehano
    -Märklin Mini Club Z
    - Marklin gauge 0
    - Marklin track 1
    - Marklin Gauge H0
    -Yet
    -Piko G
    -Piko H0
    -Piko N
    - Pico TT
    -Pola
    - Chocolate candy
    -Prize
    -RS-Creglinger-Preh
    - Revell
    -Rietze
    -Rivarossi
    -Roco H0
    -Roco H0e
    -Roco N
    -Roskopf
    -Röwa
    -SR-24 model railway oil
    -Saxon models
    -Layer
    -Schuco
    -Seuthe
    -Toy
    -Tams
    -Till
    -Train safe
    -Trix H0
    -Trix N Minitrix
    - US manufacturer
    -Uhlenbrock
    -vape
    -Vero
    - Viessman
    - Vollmer
    -Viking
    Other
    Contact
    Do You Have Questions?
    Give us a call!
    Free and without obligation!
    top offer
    Piko 57194 Starter set ICE 3 of the DB only ICE NEW GOODS
    categories
    Auhagen
    Beli-Beco lamps
    Brawa
    Brekina
    ESU
    Electrotren
    Faller
    Fleischmann
    Heki
    Heris
    Kibri
    Local railroad
    LGB
    Lenz
    Liliput
    Lima
    Littfinski
    Lux
    Märklin
    Noch
    Piko
    Rivarossi
    Roco
    SR-24 model railway oil
    Schuco
    Seuthe
    Tams
    Tillig
    Train Safe
    Trix
    US manufacturer
    Uhlenbrock
    Viessmann
    Vollmer
    Wiking
    zimo
    Other
    item description
    This item is not suitable for people under the age of 15
    Viessmann 5224 Light Signal Control Module Brand new
    (Article number: VI5224)
    This module has an integrated digital decoder (Märklin-Motorola, NMRA-DCC) and is used to control 2 light signals (a main and a distant signal) with LEDs and a common positive pole or incandescent lamps if they do not consume more than 200 mA of current together. Prototypical soft signal aspect change. Suitable for all light signals from track 0 to Z (except signals with multiplex technology). The switching can be carried out conventionally using the button control panels Art. 5545, 5546 and 5547 or directly digital. It is equipped with the Viessmann signal bus and can be configured for the following applications: 2-aspect or multi-aspect light signal: A 2-aspect main signal with the signal aspects go and stop requires the button control panel item no. 5547 (for 4 signals) or a digital address. A 3- or 4-aspect signal with the additional terms Slow travel and Maneuvering prohibited requires the button control panel Art. 5546 (3-aspect, 2 signals) or 5545 (4-aspect, 2 signals) or 2 addresses in digital mode. Station signal or block signal: When configured as a block signal, the module reacts automatically to the transmitted route status. This function requires track occupancy reports with permanent contacts. Up to 2 monitored sections are required for each signal section. In this operating mode, the module automatically switches to travel if the following section is reported as free via the signal bus. If one of the two sections is occupied, the module switches to halt. Own distant signal or distant signal on the mast: The signal module controls the main signal and the associated distant signal or the distant signal of a following signal if it is attached to its own mast. In this case, the distant signal is switched off prototypically when it stops. At a standstill, interrupt the traction current or switch on the brake generator: With the pluggable train control relay Art. 5228 the module can stop the trains automatically. This can either be done by switching off the traction current before the signal or, in the case of digital systems Noch prototypically, by switching to the brake module Art. 5232 (for Märklin-Motorola) or a brake generator (for NMRA-DCC). Coupled signal: The configuration can be used to specify whether a signal should only display stop and slow travel. In this case, the module also only requires the button control panel Art. 5547 or a digital address. The logic in the control module ensures that the red button always wins when several buttons are pressed at the same time, both when controlling via button control panels and via contact rails.
    Terms of payment:
    payment incl. Shipment. No Ebay fees.
    We only charge shipping costs once. Therefore, please wait before paying for your purchase until all items have been combined as far as possible and the shipping costs have been adjusted.
    Please do not make the payment beforehand!!
    Delivery terms:
    The goods are securely packaged for shipping and usually sent on the day the money is received. Shipping discount is possible. If you buy several items, we will of course always choose the cheapest shipping method.
    Secure payment methods
    shipping partner
    Contact
    Do You Have Questions?
    Give us a call!
    Free and without obligation!
    top offer
    Piko 57194 Starter set ICE 3 of the DB only ICE NEW GOODS
    Everything about model railways
    etope 8
    This module has an integrated digital decoder (Märklin-Motorola, NMRA-DCC) and is used to control 2 light signals (a main and a distant signal) with LEDs and a common positive pole or incandescent lamps if they do not consume more than 200 mA of current together. Prototypical soft signal aspect change. Suitable for all light signals from track 0 to Z (except signals with multiplex technology). The switching can be carried out conventionally using the button control panels Art. 5545, 5546 and 5547 or directly digital. It is equipped with the Viessmann signal bus and can be configured for the following applications: 2-aspect or multi-aspect light signal: A 2-aspect main signal with the signal aspects go and stop requires the button control panel item no. 5547 (for 4 signals) or a digital add