UHLENBROCK 68100 Marco Set New Boxed

Description

Model railway, UHLENBROCK 68100
MARCo receiver
train detection
Reading and programming CVs
speed control
Automatic control of special functions and locomotive speed
Switching magnet articles and routes
Digital block control
shuttle train control
Locomotive-dependent hidden yard control with through track
The through track can be used by individual locomotives or by Allen locomotives at the push of a button.
Locomotive-specific stopping time in automatic mode
In automatic mode, several special locomotive functions can be switched separately by waiting times.
The MARCo receiver contains two RailCom® detectors for monitoring one track section each and an intelligence that can carry out switching processes independently. The connection to the digital control center is made via the LocoNet. If simple switching functions are to be carried out independently of the direction of travel, one module can monitor two track sections. Only the address of the passing locomotive is transmitted and simple switching tasks are carried out. At points where an automatic function dependent on the direction of travel is to be carried out, the two track sections of a detector are installed in the track one behind the other. In addition to the address, the direction of travel is recognized and the automatic system can stop the train precisely in the second section.
Item No. 68500 MARCo receiver
RailCom® transmitter
What is needed
To operate a feedback system with RailCom®, boosters are required that can generate the "cutout" required for RailCom®. such as B. our Power 4. The two RailCom® detectors of the MARCo receiver can monitor two different tracks for switching functions that are to be carried out depending on the locomotive address. If the direction of travel is to be evaluated, both sections must be built into one track one behind the other. A MARCo receiver is installed at each end stop on a commuter route. With block route control, each block receives a MARCo receiver. For fully automatic control of a hidden yard, a MARCo receiver is required for the entry track, a MARCo receiver for the exit track and one MARCo receiver for each track of the hidden yard.
Every vehicle that is to carry out an automatic control function or whose address is to be reported back receives a RailCom® transmitter. The transmitter is installed in a locomotive in addition to the locomotive decoder and is only connected to the power pickup of the locomotive. Like a DCC decoder, it can be programmed with Allen short or long DCC address. There is also the option of connecting a LISSY mini transmitter module.
Item No. 68320 RailCom® transmitter individually
Item No. 68321 RailCom® transmitter, pack of 5
MARCo set
The quick entry into the MARCo-System
Contains two RailCom® transmitters, a MARCo receiver, a LocoNet cable and a manual.
Item No. 68100 MARCo set
LISSY/MARCo-Creator: The quick way to a LISSY/MARCo-controlled system
The LISSY/MARCo Creator is the PC program with which you can plan a model railway layout with LISSY/MARCo easily, conveniently and quickly and program all LISSY and MARCo receivers with the necessary settings.
The desired automation can be designed using a layout track plan. Whether shuttle train routes, stopping points, staging yards or the switching of special locomotive functions, all automatic control processes that LISSY/MARCo masters can be transferred to the layout planning with the LISSY/MARCo Creator.
The program also manages all addresses that appear on your layout for solenoid items, feedback, LISSY and MARCo receivers. Routes that are required for station controls can also be created and managed with the program.
Routes in the Intellibox® II, in the IB-Control II and in the Track-Control route memory can also be programmed directly with the LISSY/MARCo-Creator. All system data can be saved and printed out.
Plan LISSY/MARCo-controlled systems on the PC
Easily program LISSY and MARCo receivers on the system
Define routes on the PC and program them into the Intellibox® II
Manage all address data of the system
Save and print out the system programming
Licensing is linked to the serial number of your digital center for which the software registration has been made. It cannot be transferred to other digital command stations. To use the software for other digital command stations, we offer an additional license at a reduced price.
Item No. 19300 LISSY/MARCo Creator
Item No. 19310 LISSY/MARCo Creator additional license
All items can be viewed and picked up from us.
new item
, in OVP (original packaging); You buy 1A goods in a specialist shop; invoice incl. 19% VAT; Switzerland, Norway and overseas VAT deduction possible in our shop;
Opening hours:
in Krefeld and Wassertrudingen
Closed on Mondays (please inquire in Wassertrüdingen)
Tue - Fri 10:00-17:00, Friday until 18:00
Sat 10:00-14:00
According to EU Directive 2009/48/EC, model trains/cars are not suitable for children under the age of 15. Particular danger for children up to 3 years of age due to small parts that can be swallowed.*
The MARCo receiver contains two RailCom® detectors for monitoring one track section each and an intelligence that can carry out switching processes independently. The connection to the digital control center is made via the LocoNet. If simple switching functions are to be carried out independently of the direction of travel, one module can monitor two track sections. Only the address of the passing locomotive is transmitted and simple switching tasks are carried out. At points where an automatic function dependent on the direction of travel is to be carried out, the two track sections of a detector are installed in the track one behind the other. In addition to the address, the direction of travel is recognized and the automatic system can stop the train precisely in the second section. To