TCS MC4-KAC ~ HO & N Scale DCC Decoder ~ 7 Pin 4 Function ~ Keep Alive Plug 1443

Description

Iron Planet Hobbies
TCS MC4-KAC ~ HO & N Scale DCC Decoder ~ 7 Pin 4 Function ~ Keep Alive Plug 1443
The MC4-KAC is a 4-function HO and N scale hard-wire decoder with a 7 pin JST socket. The MC4 is designed for use in locomotives where a T-series or M-Series decoder is too large, and more than 2 lighting functions are needed. The MC4-KAC is great for use in locomotives with ditch lights!
The MC4-KAC includes a factory-installed 2-Pin Mini Connector with Blue and Black&White wires to use when connecting Keep Alive® devices with the same 2-Pin Mini Connector. Keep Alive® devices with the connector are designated as "KA(n)-C"
Back EMF Load Compensation:
Provides superior slow speed control and high performance under load.
Quiet Drive:
Super-quiet motor control for "buzz" free motor performance.
DC Mode:
Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC.
Variable Momentum:
Allows you to make custom acceleration and deceleration curves.
Incandescent Bulb Support:
This decoder can be used with 12 Volt bulbs.
Function Remapping:
Buttons 0 through 12 may be used to control the lighting functions of this decoder.
Programmable Lighting Effects:
Choose from 20 separate user-programmable lighting effects!
Dimmable Brightness:
Configure multiple different brightness levels for your LED's or incandescent bulbs.
Decoder Lock:
Feature which prevents accidental/unwanted programming while activated.
Specs:
Interface Type:
Hard-Wire or
Direct-Plug (7-Pin JST)
Dimensions (L x W x H): 0.419” x 0.71” x 0.191” or 10.63mm x 18.02mm x 4.85mm
Scale: HO Scale N Scale
Continuous/Peak: 1.0/2.0 Amp
Total Functions: 4
Function Rating: 100 mA
12V Outputs:
4
We are an authorized TCS dealer
.
Thanks For Looking!