PMC Defense Glock Magwell for 17/22/24/37/38/31/32/34/35/24/41 GEN 1-3

Description

This extremely lightweight polymer magwell will make your load and reload much faster. The magwell is designed to improve your grip and shooting performance by giving the bottom of your handy and pinky finger more support, which adds comfort as well.
Magwell for Glock fits Gen 1,2 and 3. 17/22/24//37/38/31/32/34/35/41/24
Made from a proprietary glass filled nylon and carbon fiber for extreme durability.
Very easy to install, No alterations to your gun!
Magwell protects your pistol if it gets dropped and lands on the butt of the gun.
Includes allen wrench for installation.
Free returns
Installation
1. Remove any existing grip plug from the back of the grip.
2. Push the grip plug (provided) in the hole of the back of the grip about 1/2" down,so that the brass insert is facing down into the gun.
3 Place magwell up to the bottom of the grip. Make sure your hole from the magwell lines up with the threads from the grip plug.
4. Push the magwell up by hand as far as you can. NOTE:  Push the front and back at the same time using a lot of force until it stops.
5.Place screw into the hole of the magwell and thread it into the grip plug with the provided allen wrench, until you feel tension. Once you feel tension, take about a full turn more for a tight fit.
DO NOT OVER TIGHTEN!!!
Please note: Some grips are different than others, so magwell might fit different and require a tighter fit.