-40%

HO MRC DCC Decoder With JST 9 Pin Connector 1651

$ 13.2

Availability: 100 in stock
  • All returns accepted: ReturnsNotAccepted
  • MPN: Does Not Apply
  • Condition: Estate purchase - Looks like old stock
  • Brand: MRC

    Description

    MRC DCC Decoder With JST 9 Pin Connector 1651 HO
    All train electronics are from the same estate.
    None have been opened or tested.
    They are like new, but I list all items as used, since I am not a store. I tried to obtain information on the items from web resources.
    I have no experience with this technology and am not able to assist with your applications.
    All are sold as-is and no returns.
    Box Ebay2
    from website
    Model Rectifier Corporation HO Scale Decoder with JST Connector/Adapter
    MRC Item #0001651
    This economical decoder comes equipped with the JST connector as well as the standard NMRA connector for DCC.
    Designed for HO scale
    Built-in NMRA DCC plug and 9-pin plug
    Maximum current: 1.5 Amp
    Programmable for either 2-digit (1-127) or 4-digit (1-9999) addresses
    Programmable start voltage
    Programmable acceleration rate
    Programmable deceleration rate
    Programmable speed curve (factory pre-set)
    Programmable top voltage
    Programmable 14, 28, or 128 speed steps
    Directional lighting at 0.1 amp rate
    Easy setting "Rule 17" lighting, ditch, strobe and Mars lights
    2 accessory functions (ACC1 & ACC2), at 0.1 amp rate
    Supports advanced consisting, (CV19)
    Supports programming on main
    Compatible with NMRA DCC standard
    Complies with the Part 15 of FCC
    26.5mm long x 15.0mm wide x 5.0mm high