Bergara B14 HMR & Pro - Cheek Rest Problem Solver - Set up for your exact height

Description

Bergara B14 HMR Cheek Rest Repeatable Spacers!
No more annoying micro adjustments trying to find your scope alignment every time you remove the bolt for cleaning or maintenance...
These spacers slide onto the posts of your Bergara Adjustable Cheek Rest and make it so you have a Repeatable rest location every single time you reinstall your rest after having to remove it, to remove the bolt for cleaning or maintenance.
No glue or alterations to your rifle are necessary. They slide on tight, will not fall off, but can be removed if needed without any effect to your rest, rifle, or the steel posts.
Default (max length) size will be shipped unless a length request is sent upon purchase.  With the full length you just measure your exposed metal cheek rest post length and trim to fit.
-= Installation instructions =-
When trimming the sleeves to the length you need: Only cut material from the shiny end of the sleeve.
The dull end will be installed at the bottom of the post and come to rest against the rifle stock. It's slightly flared on the dull side. The flare is what keeps the sleeves from coming off the posts every time you remove them 💪🇺🇸
If you know your measurement: Length of the exposed metal post (preferably in mm, but I can convert),
send the measurement in the PayPal notes section, eBay message, or send an email to me direct and I will make them to the exact length you need.
(this option is temporarily unavailable)
Your new sleeves will be shipped using USPS First Class Mail.
Tracking is provided.
((Should be obvious, but the factory cheek rest shown is from my personal rifle, and is not included in the sale. It's just for visual reference on how the spacers install on the rest from Your personal rifles rest))