2KBCL MR235 (PM50) 1 x 3way Screw Terminal Points/ Signal Junction Board 1stPost

Description

Menu
Home
About Us
Returns
Contact Us
View Feedback
Add to Favourites
2KBCL MR235 (PM50) 1 x 3way Screw Terminal Points/ Signal Junction Board
Main Description
2KBCL MR235 (PM50) 1 x 3way Screw Terminal Points/ Signal Junction Board
As you are aware all proprietary manufactures supply their products with short lengths of wire which are then connected to your cables. This is either done by using a terminal block or soldering the wires to your cable.
This is a 3 way section broken off the 6 way terminal.
Each 3 way section has 3 IN screw terminals, and 3 OUT terminals. The terminals and the board are rated at 10 Amps, so will take wires from lighting circuits that draw very little current to points via a CDU which draw large amounts of current. They can be used as a bank of 18 ways or snapped off so you have a 3 way terminal for point motors or signals, and so on.
There are 4 fixing holes for each 3 way section, or you can us the self adhesive backing.
made with love by
jarilo
design
jarilo
design
2KBCL MR235 (PM50) 1 x 3way Screw Terminal Points/ Signal Junction BoardAs you are aware all proprietary manufactures supply their products with short lengths of wire which are then connected to your cables. This is either done by using a terminal block or soldering the wires to your cable.This is a 3 way section broken off the 6 way terminal.Each 3 way section has 3 IN screw terminals, and 3 OUT terminals. The terminals and the board are rated at 10 Amps, so will take wires from lighting circuits that draw very little current to points via a CDU which draw large amounts of current. They can be used as a bank of 18 ways or snapped off so you have a 3 way terminal for point motors or signals, and so on.There are 4 fixing holes for each 3 way section, or you can us the self adhesive backing.